Synthesis
Grafting onto
“Grafting-onto” involves the chemical reaction preformed, functionalized polymers with surfaces containing complementary functional groups
Grafting from
‘‘Grafting-from’’ involves an insitu polymerization of an initiator functionalized surface with monomer.
Grafting onto
“Grafting-onto” involves the chemical reaction preformed, functionalized p
Insitu 중합법
서로 혼합되지 않는 2상의 어느쪽이 한쪽의 상에 모노머와 촉매를 용매로 해서 계면에서 중합반응을 일으켜 심물질의 표면에 균일한 막을 형성하는 것이 insitu 중합법이다. 원리는 그림 4와 같으며 친수성모노머 또는 소수성모노머의 어느 한쪽이나 이들의 프리폴리머를 이용해서 마
1. Abstract
호르몬은 체내 여러가지 대사과정을 조절하여 항상성 유지에 기여하는 물질로, 생명공학의 발전에 따라 생산량이 증가하고 및 생산 방법이 다양해졌다. 호르몬은 그 종류에 따라 미생물을 통한 대량생산이 가능한 것부터, 아미노산서열이 생성된 이후의 추가적인 PTM(post translation modification)
situation in cells?
세포내부에서 번쩍거리는 실제 이미지를 상상할 수 있겠나? Like this – 다음 슬라이드
This picture shows an example,
Detection of target proteins using fluorophore-conjugated antibodies.
Synaptophysin (red) and microtubule-associated protein 2 (MAP2; green) in mouse cortical neurons were fluorescently labeled with specific primary antib
hiring and has fal-tered now that the surplus of management talent has eroded. the second, common only among large, older co,panies, relies on complex and bureaucratic models from the 1950s for rorecasting and succession planning-legacy systems thea grew up in an era when business was highly predictable and that fail mow because they are inaccurate and costly in a more volatile environment.
순환하는 한 계속되며 균열은 최대 인장응력의 수직방향을 따라서 성장한다.
균열전파 성장률은 매우 작아서 매 사이클당 〖10〗^(-8)에서 〖10〗^(-4)in 이지만 매우 많은 사이클을 통해 성장해간다.
Fig. 2 알루미늄 합금의 균열표면에서 피로 줄무늬
Fig. 3 피로파괴 모식도
In the Second World War the Japanese army invaded and subsequently occupied Malaya, Sabah, Sarawak, and Singapore for over three years. During this time, ethnic tensions were raised and nationalism grew. Popular support for independence increased after Malaya was reconquered by Allied Forces. Post-war British plans to unite the administration of Malaya under a single crown colony called the Malay
in procedure of sample grinding.
3.2. Filling up Powder at Sample Holder
X-ray diffractometer need to a flat sample plane of 1cm×2cm. We fill up powder at holder to obtain a flat sample plane. A procedure is below(Fig. 10) when we fill up at a general metal holder.
Fig. 10. Filling up at a general metal holder.
1) Put a sample over thick glass plate(A direction of sample
AlN의 형성은 열역학적으로 자발적인 반응
In-situ Al/AlN 복합재
알루미늄의 높은 열 전도도를 유지
열 팽창계수의 감소
비강도 증가
복합재의 제조 원가 절감
최대 50 wt% AlN이 형성되었음 R.G. Reddy et al (2007)
수 마이크로미터 크기의 AlN 입자 형성
AlN이 용탕의 상층부에 집중적으
ToolsThe MBE growth can be monitored in real-time using a Reflective High Energy Electron Diffraction (RHEED) system. The system includes an electron gun which directs an electron beam towards the substrate at a shallow angle (1-2°), and a phosphor screen which detects the diffracted beam.
As the substrate surface varies (from rough to smooth) so does the pattern detected at the screen.